Anchor Rain Coat is a high-performance waterproof coating designed to protect exterior walls from rain, moisture, UV rays, and fungal growth. It prevents water seepage and prolongs the life of exterior paint.
- Garkheda, Chhatrapati Sambhajinagar - 431005
- info@anchorcoating.com
- Mon To Sat 10.00 am - 6.00 pm
Rain Coat Exterior walls
Anchor Rain Coat – All-Weather Protection for Exterior Walls
Product Description
Heavy-duty, high elastic strength, microbial resistance, non toxic exterior waterproofing paint that shields walls from rain, humidity, and weather damage. Forms a flexible film that resists cracking and peeling.
Coverage:
50-65 sq ft/L/2coats (On smooth
surface of low porosity)
30-45 sq ft/L/2coats (On textured
surface of low porosity)
Shades Available:
White in All Sizes
Available Pack Sizes:
1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr
Thinning/Dilution:
No Dilution, Apply Directly
Recommended Undercoats
Putty: For wall/plastered surfaces - Anchor Acrylic Wall Putty / Cement
Based Putty.
Primer: For wall/ plastered surfaces - Anchor Acrylic Water Thinnable
Primer or Anchor Ultimate Primer.
Areas of Application:
Exterior Surfaces, Concrete, Cement Sand Plasters, etc
Application Method:
Brush / Roller / Spray
Directions for Application
1. Shake well before use.
2. Apply the first finishing coat and allow it to dry for at least 4-6
hours. After the first coat dries, apply the second coat and allow it
to dry overnight.
3. Keep the container tightly closed to prevent drying.
4. You can apply one additional coat for enhanced protection &
durability
FAQs – Anchor Rain Coat
-
1What is Anchor Rain Coat used for?
-
2Can it bridge cracks in the wall?
Yes, Anchor Rain Coat has crack-bridging capabilities up to 1 mm, helping to seal minor hairline cracks and prevent water from entering through the surface.
-
3Is it suitable for coastal or high-rainfall regions?
Absolutely. Its advanced waterproofing and anti-fungal properties make it ideal for areas exposed to heavy rains, humidity, and salt-laden air.
-
4How many coats are required for optimal performance?
For best results, 2–3 coats are recommended over a well-prepared and primed surface, allowing 6–8 hours drying time between coats.
Feel Free To Contact Our Team
- Call Anytime +91 9175953188 , 9422701091
- Address Quality Tiles, 3rd Floor, Wing A, Citrus, Space Olympia, Garkheda, Chhatrapati Sambhajinagar - 431005.
Anytime
info@anchorcoating.com
info@anchorcoating.com
A Brief Overview Of The Space You Would Like To Decorate.
There are many variations of passages of lorem Ipsum available, but the majority have suffered alteration in some
Explore Featured Properties
$500,000 from free economy shipping
No products in cart.
